Grip Install Instructions

Things You Will Need

  • 3mm hex tool
  • Mallet
  • Cleaner & cloth

Assembly time, approximately 5-10 minutes. Difficulty: Easy.

SPECS
Weight: 97g (Pair)
Length: 136mm
Diameter: 30mm
Colours: Black, Red, Green, Blue, Orange, Turquoise, & Purple

 

INSTRUCTIONS

STEP 1:

Remove your gross, sticky, gooey, sicko old grips. Clean scruzz off of bar.

STEP 2:

Slide on your fresh new One Up Grips. Be sure you get the right sides. Each Grip has an R & L denotation on the outer flange.

STEP 3:

Lightly tap the end with a mallet to ensure the grip presses completely onto the bar.

STEP 4:

Torque lockring bolt to 4Nm. Test the grip to make sure it does not spin under twisting force. If so tighten until spinning ceases.

Booooom, Yer good to go.