Great product
"Great tool and easy to install. Would highly recommend to anyone looking for a tool to take on the trail."
EDC Carrier
Your Mobile Toolbox.
The Carrier is one piece of lightweight aluminum that keeps your EDC V2 Tool and a Plug Kit in your stem. EDC Tool not included.
Easy to Install.
It takes less than 10 minutes to turn your steerer tube into a portable workshop. Just remove the start nut, drop in the carrier and bolt it in place.
FAQ
Will the carrier fit my Fox 38 fork?
The carrier is only comptible with Fox 38 Performance Elite & Factory series forks that have a steerer tube longer than 245mm.
I went to install my carrier, and it stops before fully inserting into my steerer tube?
If the carrier will not fully insert into your fork, then it is likely that the length of your steerer tube is less than the minimum requirement. Please double check your steerer length and compare it to our compatibility list before proceeding.
My tool does not fully insert into the carrier?
There are three possibilities for this:
1. Make sure the middle O-ring has been removed from the EDC tool system.
2. Is the mutli tool oriented correctly within the EDC tool body? If it is backward and not meshing will the tire lever, the tool will bulge and will not fit into any holder.
3. Check the steerer tube length, if you there was any force required during installation of the carrier then it is likely under pressure and flexing. This means your fork steerer length is too short, or it is an incompatible fork.
Will the carrier fit in a fork with a straight steerer?
It is possible with some pre-requisite checks.
1. Steerer ID meets the compatibility requirements for the carrier (Min ID: 24.25mm)
2. Steerer does not neck internally at any point. You can check this by running a straight edge down & against the internal wall of your steerer. If it deflects then it necks and is not compatible.
3. Steerer is within our compatible length range. 185mm-265mm
4. Your current Top cap will need to replace the 1-1/2 plug supplied with our carriers. So check that the top cap fits flush without rocking, in the underside of the fork steerer.
If you can confirm all of these requirements are good then you should have no issue installing our carrier in your straight steerer fork.
Will the EDC carrier work in carbon steerers?
Unfortunately, none of our EDC options are compatible with forks with carbon steerer tubes.
Can you fit the plier and plier kit in the carrier?
The plug and bacon strips with fit within the small storage capsule and then fit into the carrier. The Pliers, the large storage capsule or a c02 cartridge do not fit in the carrier.
How do I use the chainbreaker?
The chainbreaker is mounted to the tire lever. Using the T25 in the multi tool, loosen the chainbreaker and rotate it perpendicular to the tire lever. Using the 3mm in the multi tool, back the pin off, then you can position the tool around the chainlink and thread to pin back in until you have broken the chain!
Reviews
Overall rating: 4.737805 / 5 from 164 reviews.
AI Generated Review Summary
The EDC Threadless Carrier is highly praised for its ease of installation, outstanding quality, and secure access to tools. Customers appreciate its smooth fit and compact design, making it a convenient and reliable tool carrier for the trail.
Summary topics
- Product Fit: 7%
- Carrier Ease of Use: 6%
- Installation Ease: 24%
- Product Quality: 7%
- Tool Access: 4%
Review topics: ["fit","quality","looks","issues","color","design","improvement","post","finish","instructions","setup","works","build","support","service","tool","install","carrier","system","cap","access","nuts","tube","buy","holds","solution","idea","compartment","addition","machining"].
Review highlights
- "Nice smooth fit, little gold accent looks great." —
- "Great compact tool, hard installation" —
- "I’m really pleased with my edc tool and thread less carrier." —
Reviews
Install was easy and works
"Install was easy and works as advertised. Well made product"
Nice, but too long in my opinion
"This is a great piece of kit and solves the problem of carrying a multi tool, or really forgetting a multi tool. Good quality and have used others on another bike. My only complaint is it is too long and requires too long a steerer tube, They should make a shorter version by like 20 millimeters so you don't need a 190mm steerer tube."
EDC Threadless Carrier
"Knocked off a star because the larger storage tube won't fit with the threadless carrier. Otherwise the installation was very straightforward and it seems like a solid product."
"Love it"
Easy tool holder in the classic green
"So easy to use and reminds me of bmx parts."
Great quality. Straightforward installation
"Great quality. Straightforward installation"
It was a present for
"It was a present for my son who is very happy with it."
Easy to install and a
"Easy to install and a great way for carrying tools"
"Love it!!! Easy install"
Q&A
- Hi, will the EDC tool and the EDC plug kit both fit into the EDC Threadless carrier? thank you
- Hi Michael - you sure can. That threadless carrier will fit the plug kit installed in the V2 tool no problem.
- I have your EDC tool from 2020. Will it fit in the threadless stem carrier? I just got a new bike and want to transfer it over. Thanks
- Hi Wayne, Thanks for your message, I'm happy to help. If your EDC tool has a black multitool and black chain breaker, then yes it will fit in the Threadless Carrier. If it has a green multitool and green chain breaker then it won't fit, and you'll need the newer V2. Hope this helps, please let me know if there's anything else I can do for you. Cheers,
- Would It work with the 2012 trek rumble fish pro? thank you
- Hi Ryan, Thanks for your message, I'm happy to help. Unfortunately not, the fork you have on the Rumble Fish is not compatible. I'd suggest taking a look at our EDC Pump options as an alternative method of storing the V2 EDC Tool. They can mount to the water bottle cage bolts on your frame. Hope this helps, please let me know if there's anything else I can do for you. Cheers,
- What's the diameter of the bottom cap of the threadless carrier? Trying to see if this will fit in my Poseidon Redwood rigid fork. Thanks!
- Hi Levi, Thanks for your message, I'm happy to help. The outer diameter is 40mm. We have seen people use the top cap from their non-EDC set up in place of our cap for forks with a narrower opening at the bottom. Hope this helps, please let me know if there's anything else I can do for you. Cheers,
- Can any of the EDC carriers store a CO2 cartridge and filler?
- Hey Jason, You can store a CO2 cartridge in both sizes of our EDC Pumps. The pumps have an integrated CO2 inflator in the head! You could then store the tool + plug kit in your stem.